SWAGTRON T3 User Manual page 18

Hands free smart board
Hide thumbs Also See for T3:
Table of Contents

Advertisement

When the rider steps on a pedal, the SWAGTRON® will adjust itself to balance automatically.
If the SWAGTRON® does not enter self-balancing mode
when triggering the foot-switch, the warning LED will
light up. DO NOT operate the SWAGTRON® under these
conditions. Please wait a few minutes and try again.
If you are on a slope, move the SWAGTRON® to
a fl at area. If you are still receiving the warning
light, contact SWAGTRON® technical support
immediately.
NOTE:
When riding the SWAGTRON®, you must make sure both feet
are touching the pedals for proper detection. Do not put
other objects on the pedals, as it could cause the system to
lock or self-drive.
NOTE:
+ Do not tilt forward or backwards beyond 10 degrees,
as the unit may malfunction.
+ The SWAGTRON® will not function if your unit fl ips upside down.
+ Avoid uneven or rocky surfaces as the SWAGTRON® may not function properly.
+ Avoid hills or slopes of more than 30 degrees incline.
Swagtron T3 Hands Free Smart Board
19
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents