Slot For Usb Stick; Serial Data Transfer - Siemens SINUMERIK 802D sl Operator's Manual

4.2.3

Slot for USB stick

In the SINUMERIK 802D sl, a slot is reserved for a USB stick.
• USB stick can be inserted or removed during
• Load and execute part programs from the
• No loss in speed during execution of part
• No special software necessary for
Part programs on the USB stick are not edited via controller, but rather via PC.
Highlight
● Efficient and reliable solution for handling a large volume of user data
● Freedom in the selection of the mass storage device
4.2.4

Serial data transfer

The SINUMERIK 802D sl pro facilitates easy data transfer from and to PCs via the RS232
interface. To do this, install the RCS802 tool on your PC.
• Backing up of machine data
• Archive/series startup file
• Backing up of part program data
Note: If you have not received the Toolbox CD, please consult your machine OEM.
Highlight
● Easy data transfer with a proven track record
SINUMERIK 802D sl pro - Milling
Control system overview for machine tools' sales people, 07/2008
operation, i.e., the machine does not have to
be restarted in order for the USB stick to be
recognized.
USB stick
programs from the USB stick (DNC
operation)
reading/writing the USB stick via PC
Program management and user memory
4.2 User memory and data management
☑ Basic configuration, only USB stick required
☑ Basic configuration, installation of RCS802 tool on PC
(included on Toolbox CD as standard)
19