Product Specifications - Black & Decker LAM95 Manual

Unit powers down
on its own
Document jammed
inside laminator

PRODUCT SPECIFICATIONS

Model
Dimensions
Weight
Cord Length
Voltage
Power
Pouch Thickness Capacity
Maximum Pouch Width
Estimated Warm-Up Time
Laminating Speed
• Automatic
shut-off activated
• Misfed document
(not centered or
straight when fed
through in-feed slot
or not fed with the
sealed edge first)
• Empty pouch
• Pouch was not used
• Glue residue on
rollers
• Self-adhesive
laminating sheets
used
LAM95
3.25 x 15.75 x 6.00
3.56 lbs.
5 Ft.
120 V
400 W
3 - 5 mil
9.5"
To 3 Mil – 150 Seconds
To 5 Mil – 190 Seconds
3 to 5 Mil – 190 seconds
12" / Minute
• Press power button to turn unit on
and select the appropriate tempera-
ture setting
• LAM95: Pull jam release lever and
remove item through the front in-feed
slot
• LAM95FH, LAM125FH: Press and hold
the reverse (REV) button on the control
panel while removing the item through
the front in-feed slot
• Ensure item is centered at the in-feed
slot and fed straight through the
laminator with the sealed edge first
• Always use a pouch when laminating
• Run cleaning sheet through laminator
after each use
• Never feed an empty pouch or use
self-adhesive laminating sheets
LAM95FH
3.38 x 17 .00 x 6.88
7.26 lbs.
5 Ft.
120 V
1050 W
3 - 5 mil
9.5"
To 3 Mil – 60 Seconds
To 5 Mil – 90 Seconds
3 to 5 Mil – 30 seconds
24" / Minute
9
LAM125FH
3.38 x 21.75 x 7 .50
11.66 lbs.
6 Ft.
120 V
1750 W
3 - 5 mil
12.5"
To 3 Mil – 60 Seconds
To 5 Mil – 70 Seconds
3 to 5 Mil – 70 seconds
48" / Minute