Sennheiser EK 6042 Instruction Manual page 16

- If you call up the operating menu from the standard display, the MAIN
Format menu item is displayed.
- If you call up the operating menu from the CH1 display, the CH1
Settings menu item is displayed.
- If you call up the operating menu from the CH2 display, the CH2
Settings menu item is displayed.
Overview of the operating menu
Main
Submenu
menu
CH1 Trans-
Settings mitter
CH2
Settings
Frequency Scan to next: Automatically searches a suitable
Sync
Pilot
Squelch
Squelch
MAIN Out
AUX Out
Channel
Power
MAIN Format
Level MAIN 1
Level MAIN 2
16 | EK 6042
Possible settings
Search via IR: Detects the transmitter via the
infra-red interface
List: Selects a transmitter from the list
frequency on the basis of the Squelch setting
Tune: Manually sets the frequency
License: Selects a frequency preset
Transfers the frequency to the transmitter using
the infra-red interface; see "Performing a syn-
chronization (Sync)" on page 17
inactive: Pilot tone evaluation is deactivated
active: Pilot tone evaluation is activated
not supported: Transmitter does not support
the pilot tone function
Analog reception: Adjusts the squelch threshold
Digital reception: inactive
always ON: Audio output is always activated
ON by command: Audio output can be activated
via the command function
MUTE by command: Audio output can be muted
via the command function
inactive: Audio signal is muted at all output
sockets and only active at the headphone
output
active: Audio signal is active at all output
sockets
digital AES-3 or analog
Digital reception: digital
Analog reception: Adjusts the audio level
Using the EK 6042