More about print heads
Replacing print heads
You should remove a print head from the printer ONLY to replace it or to repeat its insertion in the case
of faulty printing.
In the description of the operator tasks in this section, the illustrations on the left refer to the
vertical printer position, those on the right, to the horizontal position.
1.
With the printer idle (in standby),
(a)
open the Printer Care tab in the Printer Monitor and click on the Change button,
or
(b)
press and hold the "Power" button on the operator panel and press "Paper" once; release the two
buttons together.
2.
Open the top cover: the print head carriage will be in the head loading position.
3.
Press the print head release lever to release either:
(a)
the black print head, or
User guide
7