Table of Contents
Advertisement
2.
Clean the print nozzles
This operation MUST NOT be repeated systematically, as it will damage the print head. It should
ONLY be attempted as a last resort, before changing the print head.
(a)
Dampen a tissue handkerchief with distilled water; squeeze it slightly to remove any excess water.
(b)
Press the "Change" button in the Printer Care tab in the Printer Monitor.
(c)
Open the printer cover; release and remove the print head that is causing the problem.
(d)
Holding the print head with the nozzles facing downwards, blot it against the handkerchief, pressing
lightly.
(e)
Repeat the blotting operation a few times on different areas of the handkerchief, to clean the nozzles.
(f)
Reinsert the print head in the printer and close the printer cover.
(g)
Print the "demo" page to check the quality of printing.
User guide
11
Advertisement
Table of Contents
