Removing The Keyboard - Clevo W170ER Service Manual

Disassembly

Removing the Keyboard

Figure 12
Keyboard Removal
1. Turn off the computer and remove the battery
2. Remove screws
a. Remove screws from the
board at point
bottom of the computer
3. Remove the top cover module
and use the Eject Pin Tool
4. Carefully lift the keyboard
to push out the keyboard at
5. Disconnect the keyboard ribbon cable
point 3 .
b. Remove the top cover
6. Carefully lift up the keyboard
module and the screws.
c. Lift the keyboard up and
a.
disconnect the cable from
the locking collar.
d. Remove the keyboard.
b.

4. Top cover module
10. Keyboard
• 7 Screws
2 - 16 Removing the Keyboard
-
from the bottom of the computer and use the Eject Pin Tool to carefully push out the key-
1 2
3
and the screws
4
up, being careful not to bend the keyboard ribbon cable
10
from the locking collar socket
11
(Figure 12d) off the computer.
10
1 2
3
6
5 9
8
7
4
(page 2 - 5).
- (Figure 12b).
5 9
.
12
c.
d.
(Figure 12c).
11
10
12
10