Measuring Blood Pressure - Beurer BC 57 Instructions For Use Manual

The year flashes on the display.
• Select the desired year using the
memory button M and confirm with
the START/STOP button
The month flashes on the display.
• Select the desired month using the
memory button M and confirm with
the START/STOP button
The day flashes on the display.
• Select the desired day using the
memory button M and confirm with
the START/STOP button
If the hour format is set as 12h, the day/month
display sequence is reversed.
The hours flash on the display.
• Select the desired hour using the
memory button M and confirm with
the START/STOP button
The minutes flash on the display.
• Select the desired minute using the
memory button M and confirm with
the START/STOP button
.
.
.
.
.
27
The Bluetooth symbol flashes on the display.
®
• Use the memory button M to select whether
automatic Bluetooth
(Bluetooth symbol flashes) or deactivated (Blue-
®
tooth symbol is not shown) and confirm with the
®
START/STOP button
Bluetooth transfers will reduce the battery life.
®

5. Measuring blood pressure

Attaching the cuff
1 2
• Expose your left wrist. Ensure that the circulation of the
arm is not hindered by tight clothing or similar.
Place the cuff on the inside of your wrist.
• Close the cuff with the hook-and-loop fastener such
that the upper edge of the device is positioned approx.
1 cm underneath the heel of the hand.
• The cuff must be fitted tightly around the wrist, but must
not constrict.
data transfer is activated
®
.
3