Our name stands for high-quality, thoroughly tested products for applications in the areas of heat, weight, blood pressure, body temperature, pulse, gentle therapy, massage, beauty and air. With kind regards, your Beurer team Table of contents 1. Included in delivery ............3 7. Usage ..............10 2.
1. Included in delivery Product information Check that the exterior of the cardboard delivery Note on important information packaging is intact and make sure that all contents Observe the instructions are present. Before use, ensure that there is no visible Read the instructions before start- damage to the device or accessories and that all ing work and/or operating devices or...
3. Proper use Temperature limit The temperature limit values to which the Intended use medical device can safely be exposed The blood pressure monitor is intended for the fully auto- are indicated. matic, non-invasive measurement of arterial blood pres- Humidity, limit sure and pulse values on the wrist.
4. Warnings and safety notes General warnings Contraindications • The measurements taken by you are for your informa- tion only – they are no substitute for a medical examina- • Do not use the blood pressure monitor on newborns, tion! Discuss the measured values with your doctor and children or pets.
Page 6
• Only use the cuffs included in delivery or cuffs described • Do not drop the device. in these instructions for use for the device. Using another • Do not use the device in the vicinity of strong electro- cuff may lead to measurement inaccuracies. magnetic fields and keep it away from radio systems or •...
5. Device description • Use identical or equivalent battery types only. • Always replace all batteries at the same time. 1. Display • Do not use rechargeable batteries. 2. START/STOP button 3. Memory button M1 Notes on electromagnetic compatibility 4. Memory button M2 •...
6. Initial use Information on the display: 1. Risk indicator Inserting the batteries 2. Symbol for Bluetooth transfer ® • Remove the battery 3. Time and date compartment lid on 4. Systolic pressure the left side of the 5. Diastolic pressure device.
Page 9
There are two different ways to access the menu The year flashes on the display. from which you can adjust the settings: • Select the desired year using the • Before initial use and after each time you replace memory button M1 or M2 and con- the battery: firm with the START/STOP button When inserting batteries into the device, you will...
7. Usage The hours flash on the display. • Select the desired hour using the General rules when measuring blood pressure memory button M1 or M2 and con- yourself firm with the START/STOP button • In order to generate as informative a profile of the progression of your blood pressure as possible and ensure that the measured values can be compared, The minutes flash on the display.
Page 11
Attaching the cuff • Position the cuff so that there is a distance of 1.0 – 1.5 cm between it and the heel of your hand. • Fundamentally, blood pressure can be measured on • Now fasten the cuff tightly around your wrist using the both arms.
Page 12
Selecting the user • The systolic pressure, diastolic pres- sure and pulse rate measurements You have 2 memories, each with 60 memory spaces, to are displayed. enable the separate storage of measurements for 2 dif- ferent people. To select the corresponding user memory, press the M1 memory button (for user ) or M2 (for user ) on the...
Page 13
blood pressure monitor switches off automatically after Risk indicator 5 seconds. The World Health Organization (WHO) has defined the in- • If you forget to turn off the device, it will switch off au- ternationally recognised classification for the evaluation of tomatically.
Page 14
Please be aware that these standard values can only serve sure, only use the results that have been recorded without as a general guideline, as the individual blood pressure corresponding irregularities in your pulse. If the sym- varies in different people and different age groups, etc. bol appears frequently, please consult your doctor.
Page 15
A A is displayed. • If you press the memory button M1 again, the last individual measurement The average value of all saved measured is displayed (in this example, measure- values in this user memory is displayed. ment 03). • Press the memory button M1. •...
Page 16
Bluetooth ® You will need the “ beurer Health Manager” app for this. Step 1: BC 54 This is available in the Apple App Store and from Google Activate Bluetooth ®...
® transfer Error Possible Solution starts automatically. message cause The “ beurer Health Manager” app must be active to Unable to re- Please wait one minute allow data transfer. cord a pulse. and repeat the measu- rement. You have mo-...
Error Possible Solution Error Possible Solution message cause message cause The cuff was Please observe the notes The data could Proceed as described in not attached in chapter "7. Usage" not be sent via chapter „7. Usage“ under correctly. under the section "Atta- the section Bluetooth ®...
• For environmental reasons, do not dispose of the de- Display accuracy Systolic ± 3 mmHg, vice in the household waste at the end of its Diastolic ± 3 mmHg, useful life. Dispose of the unit at a suitable local Pulse ±...
Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Ger- • This device corresponds to the EU Medical Devices many (hereinafter referred to as “Beurer”) provides a war- Directive 93/42/EEC, the German Medical Devices Act ranty for this product, subject to the requirements below (Medizinproduktgesetz) and the standards EN 1060-1 and to the extent described as follows.
Page 21
– products that are used, cleaned, stored or maintained with the following provisions, Beurer shall carry out a re- improperly and/or contrary to the provisions of the in- pair or a replacement delivery free of charge, in accord- structions for use, as well as products that have been ance with these warranty conditions.
Page 24
Bluetooth SIG, Inc. and any use of such marks by Beurer GmbH is under license. Other trademarks and trade names are those of their respective owners. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S.