Non Synergic Welding Mode; Before Welding (Pre-Set) - Lincoln Electric LINC FEED 37 Operator's Manual

A. Non Synergic Welding Mode (CV Mode)
Description:
During Non Synergic (CV Mode) welding, the pre-setting of the welding parameters (Wire Feed Speed and Voltage) are
independent from one another.
Set-Up:
LF 37: This machine is always in Non-Synergic Welding Mode
LF 38: While pressing the Prog button, rotate the left knob until
"NON SYNERGIC" appears on the display.

Before Welding (Pre-Set):

Pre-Set Wire Feed Speed
(Meters/Minute)
Adjust with left knob.
During Welding (Actual):
These actual values are displayed for 5 seconds after the weld has stopped. Press ENTER (LF 38 Only) to recall these
values.
Actual Welding Current
(A)
A-4
Pre-Set Welding Voltage
(V)
Adjust with right knob.
Actual Welding Voltage
(V)