Table of Contents
Advertisement
To get the best Digitize image wait for the image
display on the LCD screen to adjust the brightness until
it becomes stable. It normally takes 3~4 seconds,
depending on the brightness of your film.
Wait for the "Wait" cursor to disappear, then you may
take your next picture.
Note: For power saving the x6-TouchScan will
automatically turns to sleep condition if you are not
using it for more than 3 minutes. You may wake up
the x6-TouchScan by pressing the screen.
If the x6-TouchScan is not using for more than 6
minutes it will turn off automatically.
6. Touch the Star Icon to adjust the image quality.
Low
Standard
Best
-17-
EN
Advertisement
Table of Contents
