Charging The Battery Pack - Reflecta X6 TouchScan User Manual

Charging the Battery Pack

The battery pack is not fully charged at the time of
purchase and therefore needs to be charged before use.
If the battery charge becomes low while you are using the
x6-TouchScan, it is recommended to recharge it as soon
as possible.
1. Insert the battery pack into the battery compartment
(see page 8)
2. You may charge the battery in 2 ways:
(a) Plug the USB mini B of the supplied USB cable to
the USB port of the x6-TouchScan, and plug the
other USB end into the USB port of your
computer/notebook.
Please charge the battery at least 5.5~6 hours prior
to your first use.
-9-
EN