Care And Maintenance - Lacrosse WS-9170U-IT Instruction Manual

To wall mount:
1. Secure the bracket onto a desired wall using the screws and plastic anchors.
2. Clip the thermo-hygro transmitter onto the bracket.
Note: Before permanently fixing the transmitter wall base, place all units in the desired
locations to check that the outdoor temperature and humidity readings are receivable. In
event that the signal is not received, relocate the transmitter or move the units slightly as this
may help the signal reception.

CARE AND MAINTENANCE

Extreme temperatures, vibration and shock should be avoided as these may cause damage to the
units and give inaccurate forecasts and readings.
When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or
scouring agents as they may mark the LCD and casings.
Do not submerge the units in water.
Immediately remove all low powered batteries to avoid leakage and damage. Replace only with
new batteries of the recommended type.
Do not make any repair attempts to the units. Return it to their original point of purchase for repair
by a qualified engineer. Opening and tampering with the units may invalidate their guarantee.
Do not expose the units to extreme and sudden temperature changes, this may lead to rapid
changes in forecasts and readings and thereby reduce their accuracy.
14