Positioning The Weather Station - Lacrosse WS-9170U-IT Instruction Manual

POSITIONING THE WEATHER STATION

Extend the foldout stand on the back and the weather station can be placed onto any flat surface. Avoid
placing near electronics.
To wall mount
Before wall mounting, please check that the outdoor temperature and humidity values
can be received from the desired locations.
1. Fix a screw (not supplied) into the desired wall, leaving the head extended out by
about 5mm.
2. Using the hanging hole on the back, hang the weather station onto the screw.
Remember to ensure that it locks into place before releasing.
POSITIONING THE THERMO-HYGRO TRANSMITTER
Choose a sheltered place. Avoid direct rain or sunshine.
The transmitter is supplied with a holder that may be attached to a wall with the two screws
supplied. The transmitter can also be position on a flat surface by securing the stand to the
bottom of the transmitter.
13