Troubleshooting Guide - Oreck COMPACT AIR PURIFIER User Manual

Troubleshooting Guide

Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing the
chart below. It pinpoints problems and how to correct them.
Remember, check the simple things first.
P C
ROBLEM
U
1. Power Cord
NIT DOES NOT TURN
ON
2. Selector Switch
3. Front Grill
U
Ionizer/Electronic
NIT DOES NOT
Collector Cell
REMOVE POLLUTANTS
U ,
Ionizer/Electronic
NIT SPARKS
Collector Cell
CRACKLES AND POPS
U
Old Charcoal Odor
NIT DOES NOT
Absorber
REMOVE ODOR
U
Check all the above
NIT STILL DOES NOT
points
OPERATE PROPERLY
ALL OTHER SERVICING SHOULD BE DONE BY AN
ORECK AUTHORIZED SERVICE CENTER.
W T D
HECK HAT O O
1. Plug in power cord
2. Set selector switch
for desired fan
speed.
3. Reinsert front grill
until it is flush with
cabinet front. Tap
grill lightly, if
necessary, to fully
insert.
Wash Collector Cell.
Make sure it is
thoroughly clean & dry
before re-installing it.
1. Sparking or
popping noise
occurs when a
large particle is
captured in the
Collector Cell.
2. If the unit is arcing
excessively, the
Collector Cell may
be dirty. Try cleaning
the Collector Cell.
3. If excessive
arcing continues
after proper cleaning,
the Collector Cell
may be damaged.
Return unit to the
Service Center.
Replace Charcoal
Odor Absorber.
Return unit to the
Service Center.
6