Kenwood KM240 series Instructions Manual page 10

Blenders AT282 and AT283
(if supplied)
Use the blender for soups, drinks, pâtés, mayonnaise,
breadcrumbs, biscuit crumbs, chopping nuts and
crushing ice.
important
The skirt on the bottom of the AT282 acrylic
goblet is fitted during manufacture and no
attempt should be made to remove it.
l
The attachment will not operate if it is
incorrectly assembled or incorrectly fitted
to the kitchen machine or if the medium
speed outlet cover is not fitted.
l
Don't put dry ingredients into the blender before
switching on. Cut them into cubes, then remove the
filler cap and drop the cubes through the hole in the
lid whilst the machine is running.
l
model AT282 don't process spices such as cloves,
dill and cumin seeds - they damage the acrylic.
l
Don't use the blender as a storage container. Keep it
empty before and after use.
l
Never crush ice on its own, always add a little water.
l
model AT282 never blend more than 1.5 litres (2
pints 12fl oz) - less for frothy liquids like milk shakes.
l
model AT283 never blend more than 1.2 litres (2
pints 2fl oz) - less for frothy liquids like milk shakes.
l
Smoothie recipes - never blend frozen ingredients that
have formed a solid mass during freezing, break it up
before adding to the blender.
key
acrylic blender AT282
lid
filler cap
goblet
sealing ring
blade unit
glass blender AT283
filler cap
lid
goblet
sealing ring
blade unit
base
to use your acrylic blender
1 Ensure the sealing ring is correctly fitted on the blade
unit.
2 Hold the underside of the blade unit and insert the
blades into the base of the blender. Twist to lock the
assembly firmly in place.
3 Put your ingredients into the goblet.
4 Fit the lid to the goblet and twist clockwise into place,
making sure that the tab on the lid slots into the
groove in the handle. When correctly fitted the
markings should align
5 Place the filler cap into the lid.
6 Remove the high speed outlet cover by turning anti
clockwise and lifting off
7 Place the blender over the outlet, handle towards the
back and turn clockwise to lock firmly into place.
8 Switch to maximum speed.
9 Once the desired consistency has been achieved,
switch off and unplug.
10 Remove the blender.
11 Refit the high speed outlet cover after use.
to use your glass blender
1 Ensure the sealing ring is correctly fitted on the blade
unit.
2 Fit the blade unit inside the base.
3 Screw the glass goblet onto the base.
4 Put your ingredients into the goblet.
5 Fit the lid and push down to secure.
6 Place the filler cap into the lid and push down to
secure.
7 Remove the high speed outlet cover by turning anti
clockwise and lifting off
8 Place the blender onto the outlet, handle towards the
back. Turn the blender clockwise to lock firmly into
place until the two arrows align
9 Switch to maximum speed.
10 Once the desired consistency has been achieved,
switch off and unplug.
11 Remove the blender.
12 Refit the high speed outlet cover after use.
hints
l
To prevent leaks make sure the base is locked firmly
into the goblet.
l
When making mayonnaise, put all the ingredients,
except the oil, into the blender. Then, with the
machine running, remove the filler cap and add the oil
slowly and evenly.
7
AT282
.
.
AT283
.
.