Topcom Babytalker PMR 1010 User Manual page 10

TOPCOM Babytalker 1010
15 Setting the Channel Memory
To have communication between the Baby Unit and the Parent unit they need to be set both
on the same channel memory. 15 Channel Memories are available (See chapter 23).
Any PMR set on the corresponding channel can receive and listen to
the conversation.
15.1 Baby unit
15.2 Parent unit
16 Adjusting the Baby Unit VOX sensitivity
The baby unit transmission is activated by the voice of the baby or by another sound in the
environment (VOX).
The VOX sensitivity can be adjusted by turning the VOX sensitivity switch
– Up = Highest sensitivity position
– Down = Lowest sensitivity position
Try the VOX sensitivity and excercise sufficiently before using
the Babytalker 1010.
10
• Press the - button
flashes on the display.
• Press the - button
channel memory.
To disactivate the Channel Memory function, select OF
• The unit will return to standby if no button is pressed within 5
seconds.
• Press the - button
flashes on the display.
• Press the - button
channel memory.
To disactivate the Channel Memory function, select OF
PTT
• Press the - button
mode.
6
twice, the current channel memory
8
or the - button
15
twice, the current channel memory
19
or the - button
20
to confirm and return to stand-by
4
to change the
18
to change the
1
;
TOPCOM Babytalker 1010