Drive System For Programming Cover; Installing On Wall; Release Lever - Bang & Olufsen beomaster 2000 Service Manual

Bang&Olubert
Snoretrak for prograrnlAg
Skalasnor
Ophengning pn vag
Ophangningsse[ med boreskabeloq slcr.rer og
rawplugs, kan rekvireres med reservedelsnr. 3390225.
Sattet indeholder materialer for oph:engning af sAvel
Beomaster som Beocord 2000.
Udloserarm f or progradag
Udskiftning af udloserarm, reservedelsnr. 2853099,
foregir lettest ved hjelp af en skavbider.
Med skavbideren presses omkring de to messing-
nitter, sAledes den skri flade pi skevbideren presser
nitten op.
Efter udskifhringen kan de to messingnitter igen
presses pi plads.
8-2
Drive Systern for Programming Cover
zlt r
k'.t
Dial Cord
Installing on Wall
Wall installing kit complete with drilling jig, screws &
wallplugs are available as spare parts no. 3390225.
The kit is composed to allow wall installing of both
Beomaster & Beocord 2000.
Release Lever
Replacement of release lever, spare parts no. 2853099,
is preferably made by using a pair of side-cutting
pliers.
The side-cutting pliers are pressed around the brass
rivets, so the skew side of the pliers press out the
rivet
After replacement of the release lever the brass rivets
can be pressed back into place again