Control Panel; Servicing Position For Pcb 3 - Bang & Olufsen beomaster 2000 Service Manual

Bang&Oluben
Yed samling kontrolleres del at alle knapper er
pesatte. Det kontrolleres ligeledes at tonekontrol-
skydere og friktionsarm for lAg er i indgreb.
Betjeningspanel
Bund og toppanel afmonteres.
De seks viste slruer shles ud- Betjeningspanelet kan
nu fernes.
Pas pd ihhz at oddegge hnntaktfiedrenz.
Kontroller ved samling at alle kontakfiedre er
indgreb med stifterne pi printpladerne
Servicest'rlling PCB 3
7-2
On-reassembly, check that all buttons are fitted Also
check that the tone control slides and the friction arm
for the lid are meshing.
Control Panel
Remove the bottom and the top panel.
Unscrew the six screws indicated" The control Danel
is now removable
Takz care ,nt tt d^trof the contad springs.
On re-assembly, check tlnt all contact springs are in
contact witl the PCB-oins.
Servicing Position for PCB 3
Ved servicering kan printplade 3 anbringes i de to
viste riller.
During servicing PCB 3 can be placed in the two slits
indicated