Dismantling; Bottom; Top Panel With Lid - Bang & Olufsen beomaster 2000 Service Manual

7-1
ADSKILLEI^SE
Bund
Aftnonter de fire skruer (A).
Lsft bunden i forkanten og trak den fri af bagpladen
Ved samling skal det pAses, at bundens bagkant
kommer ind under bagpladen
Spuielt for tge 2919
I denne bpe er der yderligere to skruer i bundeq der
skal aftnonteres. Det kan ligeledes vare nodvendig!
at frigore stelledningen mellem nettransformatoren og
bundpladen"
Toppanel med lAg
Bagpladen aftnonteres ved hjelp af de fire sh:uer (B).
Aftnonter de to skruer (C). Toppanelet kan nu
frigores ved at lsfte i dets bagkant og tr€kke bagud.
Bang&Olube
DISMANTLING
Remove the four screws (A).
Lift t}te bottom at the front edge and pull it free off
the rear plate
On re-assembly, observe that the rear edge of the
botbom sits under the rear plate
Type 2919 Onl,
In this type are two additional botiom screws to be
removed. Furthermore, it may be necessary to release
the chassis wire between the mains transformer and
the bottom plate
Remove the rear plate by unscrewing the four screws
(B).
Remove the two screws (C). The top panel can now
be released by lifting at its rear edge and pulling
rearwards.
Bottom
Top Panel with Lid