Controller Operation - Function Settings; Temperature Range Restriction - Mitsubishi Electric PAC-YT53CRAU Instruction Book

Simple ma remote controller
Hide thumbs Also See for PAC-YT53CRAU:
Table of Contents

Advertisement

Available languages

Available languages

Controller operation - Function settings

Temperature range restriction

The preset temperature range for each operation mode can be restricted.
The air conditioning unit stops.
(1) ON/OFF
Set to
Room
AUTO
COOLHEATFAN
DRYING
VENTI. SETBACK
1 Press the
ON/OFF
2 Press and hold the
restriction setting display. (A or B appears.)
3 Press the
MODE
button to select from A through D.
* When the AUTO (single set point) mode is not available on the indoor unit, or when the AUTO
mode is set to OFF in the Mode skip setting, D will not be displayed.
A. No temperature range restriction:
The temperature range restriction will not be executed for all modes.
B. Temperature range restriction for COOL/DRYING mode:
The preset temperature range for COOL/DRYING, AUTO (dual set point), and
SETBACK mode can be changed.
C. Temperature range restriction for HEAT mode:
The preset temperature range for HEAT, AUTO (dual set point), and SETBACK mode
can be changed.
D. Temperature range restriction for AUTO (single set point) mode:
The preset temperature range for AUTO (single set point) mode can be changed.
4 Press the
FAN
button to switch between the upper limit (Hi) and lower limit (Lo) settings.
(Press the button for three
(2) FAN
seconds or longer.)
A. No temperature range
restriction
(3) MODE
(3)
MODE
button to stop the air conditioning unit.
FAN
button for three seconds or longer to bring up the temperature range
(6) FAN
(Press the button for three seconds or longer.)
B. Temperature range restriction for COOL/DRYING mode
(5) TEMP.
Set to
Room
(4) FAN
AUTO COOLHEATFAN
DRYING
VENTI. SETBACK
(3)
MODE
C. Temperature range restriction for HEAT mode
(5) TEMP.
Set to
Room
(4) FAN
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
(3)
MODE
D. Temperature range restriction for AUTO (single set point) mode
(5) TEMP.
Set to
Room
(4) FAN
AUTO
COOLHEATFAN
DRYING VENTI. SETBACK
– 9 –
OFF
/
Set to
Room
AUTO COOLHEATFAN
DRYING
VENTI. SETBACK
/
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
/
Set to
Room
AUTO
COOLHEATFAN
DRYING VENTI. SETBACK

Advertisement

Table of Contents
loading

Table of Contents