Dell SCv2080 Owner's Manual page 17

Item Control/
Feature
1 Release latch
2 Module OK
3 Fan fault
SCv2080 Storage System PSU Features and Indicators
SCv2080 Storage Systems include two power supply units (PSUs) in two interface slots.
Figure 9. SCv2080 Storage System PSU Features and Indicators
Item Control/Feature
1 Release latch
2 PSU fault
3 AC fault
4 Power OK
5 Power outlet
6 Power switch
Separate and unique conditions are indicated if all three LEDs are in the same state:
• If all three LEDs are off, then neither PSU has AC power.
• If all three LEDs are on, then the General Enclosure Management (GEM) software has lost
communication with the PSU.
About the SCv2080 Storage System
Icon Description
— Press the release latch to remove the cooling fan module.
• Green — Module is functioning properly
• Amber — Loss of communication with the cooling fan
module, or reported fan speed is out of tolerance
Icon Description
— Press the release latch to remove the PSU.
• Amber (steady) — PSU fault, PSU not supplying
power
• Amber (flashing) — PSU firmware is downloading
• Amber (steady) — AC power is not detected
• Amber (flashing) — PSU firmware is downloading
• Green (steady) — This PSU is providing power
• Green (flashing) — AC power is present, but this
PSU is in standby mode (the other PSU is providing
power)
— Power outlet for the storage system
— Controls power for the storage system
17