Dell SCv2080 Owner's Manual page 15

Item Control/Feature
15 Mini-SAS port B (Slot 2/
Port 2)
16 Mini-SAS port A (Slot 2/
Port 1)
SCv2080 Storage System Storage Controller with Front-End SAS Ports
The following figure shows the features and indicators on a storage controller with front-end SAS ports.
Figure 7. SCv2080 Storage System Storage Controller with Four 12 Gb Front-End SAS Ports
Item Control/Feature
1 Battery status indicator
2 Battery fault indicator
3 MGMT port (Slot 3/Port
1)
4 REPL port (Slot 3/Port 2) —
5 SAS activity indicators
6 Storage controller
module status
About the SCv2080 Storage System
Icon Description
Back-end expansion port B
Back-end expansion port A
Icon Description
• Blinking green (on 0.5 sec. / off 1.5 sec.): Battery heartbeat
• Fast blinking green (on 0.5 sec. / off 0.5 sec.): Battery is
charging
• Steady green: Battery is ready
• Off: No faults
• Blinking amber: Correctable fault detected
• Steady amber: Uncorrectable fault detected; replace battery
— Ethernet/iSCSI port that is typically used for storage system
management and access to the BMC
NOTE: To use the MGMT port as an iSCSI port for
replication to another Storage Center, a Flex Port license
and replication license are required. To use the MGMT port
as a front-end connection to host servers, a Flex Port
license is required.
Ethernet/iSCSI port that is typically used for replication to
another Storage Center
NOTE: To use the RELP port as a front-end connection to
host servers, a Flex Port license is required.
— There are four SAS PHYs per SAS port.
• Off: SAS PHY is not connected
• Steady green: SAS PHY is connected, but not active
• Blinking green: SAS PHY is not connected nor active
On: Storage controller completed POST
15