Specifications; Smart Diagnosis - LG WT5480C series Owner's Manual

30 SPECW!CATIONS
SPECIFICATIONS
Description
Electrical requirements
Max. 'water pressure
Dimensions
Net weight
Top-Loading Washer
120 VAC @ 60 Hz
14.5~116 PSi (100-800 kPa)
27"(W) X 28 3/8"(D) X 45 3/8"(H), 55 3/4"(H with lid open)
68.6 cm (W) X 72,1 cm (D) X t 15.3 cm (H), 141 7 cm (H wkh lid open)
146.5 Ibs. (66.5 kg)
SMART DIAGNOSIS
TM
SYSTEM
Should you experience any problems with your
washing machine, it has the capability of transmit-
ting data via your telephone to the Smart Diagno-
sis Team. This gives you the capability of speaking
directly to our specially trained technicians. The
technician records the data transmitted from your
machine and uses it to analyze the issue, providing a
fast and effective diagnosis.
If you experience problems with your washer, call
1-800-243-0000 (1-888-542-2623 in Canada), Only use
the Smart Diagnosis System feature when instructed to
do so by the Smart Diagnosis Team. The transmission
sounds that you will hear are normal and sound similar
to a melody
Smart Diagnosis cannot be activated unless your
washing machine is turned on by pressing the POW*
ER button, If your washing machine is unable to turn
on, then troubleshooting must be done without us-
ing Smart Diagnosis.
USING THE SMART DIAGNOSIS
TM
SYSTEM
Follow the techniciarYs instructions and perform the following Steps when
requested,
HOLD the mouthpiece of your phone over the POWER button, when instructed to do so by the cal$ center, no more
than one inch from (but not touching) the machine.
NOTE: Do not press any other buttons or turn the cycle seiector knob
PUSH and hold the WASH TEMP button while continuing to hold your phone to the POWER button.
USTEN for three beeps. After you hear the three beeps, retease the WASH TEMR button, Keep the phone in place
unti_ the tone transmission has finished This takes about 6 seconds, and the display will count down the time Once
the countdown is over and the tones have stopped, resume your conversation with the technician, who will then be
able to assist you in using the information transmitted for anaiysis.
SmartDiagnosis is a troubleshooting feature designed to assist, not replace, the traditional method of trou o
bleshooting through service caHs_ The effectiveness of this feature depends upon various factors, including,
but not limited to, the reception of the cellular phone being used for transmission, any external noise that
may be present during the transmission, and the acoustics of the room where the machine is _ocated. Ac-
cordingly, LG does not guarantee that SmartDiagnosis would accurately troubleshoot any given issue_