Connect To The Power - LG WT5480C series Owner's Manual

CONNECT TO THE POWER SUPPLY
The washer should be plugged into a 120-VAC, 60-
Hz grounded 3_prong outJet Plug in the washer,
fmproper connection of the equipment-grounding
conductor can result in risk of electric shock Check
with a qua}ified electrician or service technician
if you are in doubt as to whether the appliance is
properly grounded Do not modify the p_ug pro-
vided with the appliance. If it does not fit the outJet,
have a proper outlet installed by a qualified eiectri*
cian. Failure to follow these warnings can cause
serious injury, fire, etectric shock, or death.
• The power outlet must be within 60 inches (1,5
m) of either side of tie washer,
- The appliance and outlet must be positioned so
that the plug is easily accessible.
- Do not overload the outlet _h more than ore
appl_nce,
• The outlet must be grounded in accordance
with current '__4ringcodes and regulations.
- Time4Jelay fuse or circuit breaker is
recommended
• It is the personal responsibility and obligation
of the product owner to have a proper outlet
[nstalJed by a qualified electrician.
• Do not use a worn or damaged power cord or
power plug, Replace or repair it immediately;
Failure to do so may result in death, fire, electric
shock, or product malfunction
• Do not modify the power cord and take care
not to damage it when installing or moving
the washing machine, Failure to do so may
resuJt in death, fire, e_ectdc shock, or product
maifunction.
- Make sure that the washing machine is
ground.
• Connect this washing machine to a grounded
outlet conforming to t_ rating prior to use,
Fai{ure to do so may resutt in fire, electdc
shock, or product malfunction.
• Do not use adaptors or extension cords. The
washing machine should aiways be plugged
into its own individual eIectdcal outlet which has
a voJtage rating that matches the rating plate.
Failure to do so may result in fire, electric shock
or disorder,
° DO _ damage or cut off the ground prong of
the power cord, Doing so may cause death,
fire, eJectric shock, or product malfunction,
INSTALLATION iNSTRUCTiONS
13