Special Use Features - LG WT5480C series Owner's Manual

Hide thumbs Also See for WT5480C series:
Table of Contents

Advertisement

Available languages

Available languages

24 HC_W
TO USE
SPECIAL
USE FEATURES
After selecting
a cycle, press the SPECIAL
USE
button
to select
additional
features
for your load.
NOTE:
• To protect
your garments,
not every feature
is
available
with every cycle.
• If the START/PAUSE
button
is not pressed
within
five minutes
to start the cycle, the washer
wilt
shut off and aH settings
will be lost.
SOAK
This option provides
a 30-minute
presoak prior to
the start of the selected
cycle. Use the SOAK op_
tion to presoak garments
to help remove
difficult
spots or stains on fabrics
At the end of the presoak
time, the selected
cycle wil! begin with the same
,water used for the soak.
NOTE: You cannot select the SOAK option
in the
TUB CLEAN.
STAIN
CARE
TM
Use this option for heavily soiied
loads that need
improved
stain treatment.
When Stain Care rM is
selected,
the wash cycte will begin with warm
water to help prevent the setting
of certain types
of
stains. Then, as the eycte progresses,
hot water
will
be added to gradually
increase
the water tempera-
ture to help remove stains that require treatment
at
higher temperatures
NOTE:
• Best results
are obtained
with smailer toads (less
than 6 _b.)
• If you select
STAIN CARE
TM,
the COLDWASH
TM
option
is not available,
SPIN
ONLY
Use this option to drain the water from the tub and
spin out the c_othes, This can be used, for example,
if the wash cycle is interrupted
by a power failure_
The spin speed can be adjusted
by using the SPiN
ONLY button.
1. Press the POWER button
to turn on the washer,
2. Press the SPECIAL USE button
repeatedly
until
Spin Oniy is selected.
3. Press the SPIN SPEED button
to select
the
desired
spin speed. Selecting
NO SPiN Ks not
allowed.
4. Press the START/PAUSE
button.
RINSE
+ SPIN
Select this option
to rinse and spin a !oad sepa-
rately from a regular cycle
This can be helpfu_ in
preventing
fresh stains from setting
in fabrics
You
can change the spin speed by pressing
the SPiN
SPEED button.
1 Press the POWER button
to turn on the ,washer.
2. Press the SPECIAL USE button until the
RINSE+SPtN indicator light is lit. (The cycle light wiJl
turn off)
3, Press the START/PAUSE
button
to start the
cycte.
SPECIAL
DRAIN
FEATURE
This washer
is equipped
with a special feature
that is designed
to make your washer
as safe as
possible.
If the washer
is paused or shut off while
there is still water in the tub, the water
will drain au-
tomatlcally
after several
minutes of inactivity
This
helps keep children safe by reducing
the possibility
of water
remaining
in the tub_
Any water
remaining
in the tub will automaticaliy
drain five minutes
after the washer
has shut off. !f
the washer
is paused and the START/PAUSE
but-
ton is not pressed within
5 minutes,
the washer
will shut off and all cycle settings
will be lost. Any
water remaining
will drain five minutes
later.
The washer can be turned on or restarted
any time
before the draining
begins. However,
once the wa-
ter begins to drain, all functions
will be suspended
until the water
has been completely
drained and
the washer
shuts off.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents