Oracle Sun Fire X2270 M2 Installation Manual page 14

Selecting a Console Option
Console
Remote Console
▼
How to Connect to the SP Using a Web-Based Client
Use this task to connect to the service processor (SP) with the ILOM web interface when using
the Remote Console option. For more information about using the ILOM web interface, refer to
the Oracle Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedures Guide, which is
included with the Sun Fire X2270 M2 server documentation collection.
This task assumes you have performed the hardware setup procedures described in the
Before You Begin
X2270 M2 Server Installation
In a web browser, type the IP address for the SP.
1
The ILOM login screen appears.
Log in to the ILOM web interface.
2
14 Sun Fire X2270 M2 Server Installation Guide for ESX Software • September 2011, -12
Description
You can install the OS and
administer the server from a
remote console by establishing a
network connection to the server
SP.
Examples of remote consoles
include:
■
Web-based client connection
using the Sun ILOM Remote
Console application
■
SSH client connection using a
serial console
Guide.
Setup Requirement
1. Determine the IP address for
the server SP. For more
information, refer to the
Fire X2270 M2 Server
Installation Guide.
2. Establish a connection between
a remote console and the server
SP:
■
For a web-based client
connection, see "How to
Connect to the SP Using a
Web-Based Client" on
page 14.
■
For SSH client connection,
see "How to Connect to the
SP Using an SSH Client"
on page 15.
For additional information about
establishing a remote connection to
the ILOM SP or using the Sun
ILOM Remote Console, see Sun
Integrated Lights Out Manager 3.0
Documentation Collection.
Sun Fire
Sun