Reinstall Grease Drip Rail And Baffl E Filters; Install Light Bulbs; Finalize The Installation Finalize The Installation - Kenmore 233.56033, 233.56043 Use And Care/Installation Manual

REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS
Reinstall grease drip rail (1). The illustration at right shows how
to reinsert the grease drip rail into the range hood.
!
CAUTION: Remove protective plastic fi lm covering fi lters before installing them.
NOTE: Assemble the metal handles to the fi lters, using provided no. 8-32 x 1/4" screws, before installing them
in the hood.
It is recommended to install side fi lters fi rst and fi nish with center one.
1. Insert one end of the fi lter into the
upper channel of the hood.
2. Raise the other end toward the inside
of the hood and insert in the grease
drip rail of the hood.
WARNING: Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk
!
of personal injury, only install shielded halogen lamps. Also, never install a cool beam, a dichroïc lamp, a
lamp not suitable for use in recessed luminaires or identifi ed for use in enclosed fi xtures.
This hood requires 2 x 50 W max, 120 V, with GU10 base, shielded halogen lamps (not included).
1. Install bulbs by placing the bulb leads into their grooves
in the socket.
2. Gently push upwards and turn clockwise until secure.
To remove bulbs, gently push upwards and turn counterclockwise to disengage bulb leads from their grooves.
NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.
1
HD0245

INSTALL LIGHT BULBS

13
HD0244
2
1
HO0090
1
2