Table of Contents
Advertisement
ADJUSTMENTS
BLC level adjustment for the PRESET 1 setting
1
Press the CURSOR (j or l) button to select the WRITE PROTECT function setting, then press the
CURSOR (d or c) button to select OFF, then press the SET button.
2
Set the BLC switch (9) to ON. The on-screen setting for BLC will automatically switch to ON. Press the
CURSOR (j or l) button to select the on-screen ON setting (get it flashing), then press the SET button.
The adjustment sub-menu "ADJUSTMENT FOR BLC" will be displayed.
3
Press the CURSOR (d or c) button until PRESET 1 is selected.
4
Press the CURSOR (l) button to select BLC LEVEL (get it flashing), then press the SET button. The
adjustment sub-menu "BLC LEVEL" will be displayed.
5
While looking at the image on the monitor, press the CURSOR (d or c) button until the BLC level is
obtained. The on-screen marker (b) will move and the adjustment value will flash according to the BLC
level setting.
Note: When an adjustment is made, the PRESET setting will automatically switch to OFF. To return to the
initial value, just return the PRESET setting to ON, then press the SET button.
6
When finished. (Refer to step 4 on page 16.)
Note: The BLC level adjustments should be entered under the PRESET 1 or MANUAL 1 settings. The BLC
level adjustments entered under the PRESET 2 or MANUAL 2 settings will not be effective.
21
English
ON
CURSOR
SET
OFF
MENU FOR ADJUSTMENT
SYNC
INT
IRIS
AI
BLC
ON
ADJUSTMENT FOR BLC
BLC MODE
PRESET1
BLC MODE
PRESET1
BLC LEVEL
(BLC LEVEL)
o------z------p 15
ADJUSTMENT FOR BLC
(BLC LEVEL)
o------z------p 20
Example:
If the backlight compensation
(BLC) correction is
insufficient, press the
CURSOR (d or c) button to
move the on-screen marker
close to the position
indicated above.
Advertisement
Table of Contents
