Table of Contents
Advertisement
SETTINGS
Synchronisation (SYNC) setting
The internal synchronisation is set using the SYNC switch (4) in the camera setup section.
INT: Initial setting. The initial value cannot be changed.
L-L: If the synchronisation setting is necessary, it can be entered in the adjustment sub-menu (see page 16).
•
The external synchronisation (VBS, VS) cannot be set in the camera setup section. When a VBS or VS sync
signal is entered at the camera VBS IN terminal, the camera will automatically detect the signal type and
VBS or VS will be displayed on the on-screen menu. If necessary, the settings can then be entered in the
adjustment sub-menu (see page 17).
Automatic Gain Control (AGC) setting
The automatic gain control can be turned ON or OFF using the AGC ON/OFF switch (6) in the camera setup
section.
ON: Auto gain control function on (setting used under normal conditions) (see page 24).
GAMMA: ON (0.45), OFF (1)
AGC GAIN: NORMAL (30 dB), HIGH (36 dB)
OFF: Fixed gain
Note:
When the AGC switch is set to OFF, the GAMMA and backlight compensation are automatically set to OFF,
and the IRIS is set to AI.
11
English
LL
INT
VBS IN
VIDEO OUT
ON
OFF
Advertisement
Table of Contents
