Operating The Appliance - Electrolux ETD29KC User Manual

4

operating the appliance

How to avoid damage to the appliance
• The ceramic glass can be damaged by
objects falling onto it.
• The edge of the ceramic glass can be
damaged by being knocked by the cookware.
• Cookware made of cast iron, cast
aluminium or with damaged bottoms can
scratch the ceramic glass if pushed across
the surface.
• Objects that melt and things that boil over
can burn onto the ceramic glass and
should be removed straightaway.
• Do not use the appliance with empty
cookware or without cookware.
• To avoid damaging cookware and ceramic
glass, do not allow saucepans or frying
pans to boil dry.
General information and tips
Residual heat can be used for melting and
keeping food warm for a short time period.
The cooking zone creates the heat required
for cooking directly in the base of the
cookware.The ceramic glass is merely
heated by the residual heat of the
cookware. The cooling fan switches itself
on and off depending upon the
temperature of the appliance
components.
OPERATING THE APPLIANCE
This induction cooktop is able to make
many kinds of cuisine having high thermal
efficiency and being safe and easy to clean.
Putting a pot on the appliance
Put the pot with food/liquid on the cooking
zone. Make sure the air inlet and air outlet
are not blocked and there are no metallic
objects close to the appliance.
Turning on the appliance
Connect the power cord to a power outlet,
the buzzer will sound and the power indicator
will flash. When the power control is pressed,
the buzzer will sound, the power indicator
lights up and this indicates that the induction
cooktop is in standby mode.
For model : ETD29PKB , ETD29PKR
Selecting function
When the appliance is in standby mode,
press the " " button or the "
enter the function mode. when the buzzer
sounds and the power indicator lights up,
the appliance will start heating.
Hot pot function
The default power level is 1600W, default
timer is 2 hours.
You can adjust the power level between
120W to 2000W by pressing the "+" or "-"
button.
The timer adjust between 30 minutes to
3 hours by pressing the "
press the "+" or "-" for desired time
Keep warm function
The default power level is 120W, default
timer is 2 hours.
You can not adjust the power level in
the keep warm mode.
The timer adjust between 30 minutes
to 3 hours by pressing the "
press the "+" or "-" for desired time
For model : ETD29KC
When the appliance is in standby mode,
press the " + " button or the " - " button
enter the heating mode. when the buzzer
sounds and the power indicator lights up,
the appliance will start heating.
The default power level is 1600W, default
timer is 2 hours. You can adjust the power
level between 120W to 2000W by pressing
the "+" or "-" button.
The timer adjust between 30 minutes to
3 hours by pressing the "
the "+" or "-" for desired time
" button
", then
", then
", then press