Updating The Bios - Dell OptiPlex 7440 Owner's Manual
Hide thumbs
Also See for OptiPlex 7440:
- Owner's manual (56 pages) ,
- Setup and specifications (32 pages) ,
- Instructions (4 pages)
Table of Contents
Advertisement
Option
Description
•
Client IP Address
This option specifies the static IP address of the client. The default IP Address is
255.255.255.255
Client Subnet
This option specifies the subnet mask IP address of the client. The default IP
Mask
Address is 255.255.255.255
Client Gateway
This option specifies the gateway IP address of the client. The default IP Address is
255.255.255.255
DNS IP address
This option specifies the DNS IP address of the client. The default IP Address is
255.255.255.255
Domain Name
This option specifies the domain name of the client.
Advanced
This option turns on the Verbose Mode for advanced debugging. By default, this
option is disabled.
Updating the BIOS
It is recommended to update your BIOS (system setup), on replacing the system board or if an update is
available.
1.
Re-start the computer.
2.
Go to dell.com/support.
3.
Enter the Service Tag or Express Service Code and click Submit.
50
DHCP - Obtains IP address using Dynamic Host Configuration Protocol(DHCP).
This option is selected by default.
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop, and when
the client address method is set to static IP.
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.
Advertisement
Table of Contents
