Power Management Screen Options - Dell OptiPlex 7440 Owner's Manual

Option Description
Limit CPUID Value Allows you to limit the maximum value of the Standard CPUID Fuction support.
Some operation systems will not complete installation when maximum CPUID
Function supported is greater than 3.
•
Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the processor.
•
Default setting: The option is enabled.

Power management screen options

Option Description
AC Recovery Specifies how the computer will respond when AC power is applied after an AC
power loss. You can set the AC Recovery to:
•
•
•
Auto On Time Allows you to set the time at which the computer must turn on automatically. The
options are:
•
•
•
•
Default setting: Disabled
Deep Sleep Allows you to define the controls when Deep Sleep is enabled.
Control
•
•
•
Fan Control Controls the speed of the system fan. This option is disabled by default.
Override
USB Wake Allows you to enable USB devices to wake the system from Standby.
Support
46
Enable CPUID Limit - This option is disabled by default.
Enable Intel TurboBoost
Power Off (default)
Power On
Last Power State
Disabled
Every Day
Weekdays
Select Days
NOTE: This feature does not work if you turn off your computer using the
switch on a power strip or surge protector or if Auto Power is set to disabled.
Disabled
Enabled in S5 only
Enabled in S4 and S5 – This option is enabled by default.
NOTE: When enabled, the fan runs at full speed.