Dell OptiPlex 7440 Owner's Manual page 43

Option Description
System Password Allows you to set, change or delete the system password.
Default setting: Not set
Internal HDD-0 Allows you to set, change or delete the system's internal hard disk's password.
Password
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password Allows you to determine the minimum and maximum length of Administrator and
Configuration System passwords.
Password Bypass Allows you to enable or disable the permission to bypass the System and the
Internal HDD password, when they are set. The options are:
•
•
Default setting: Disabled
Password Change Allows you to enable the disable permission to the System and Hard Drive
passwords when the admin password is set.
Default setting: Allow Non-Admin Password Changes is selected.
TPM 1.2 Security Allows you to enable the Trusted Platform Module (TPM) during POST. This option
is enabled by default. The options are:
•
•
•
•
•
•
Computrace (R) Allows you to activate or disable the optional Computrace software The options
are:
NOTE: Successful password changes take effect immediately.
NOTE: Successful password changes take effect immediately.
NOTE: If Strong Password is enabled, Admin and System passwords must
contain at least one uppercase character, one lowercase character and be at
least 8 characters long.
Disabled
Reboot bypass
Clear
PPI Bypass for Enabled Commands
PPI Bypass for Disabled Commands
Attestation Enable
Key Storage Enable
SHA - 256
NOTE: Activation, deactivation, and clear options are not affected if you load
the setup program's default values. Changes to this option take effect
immediately.
43