Dell OptiPlex 7440 Owner's Manual page 41

Option Description
PXE, the type of PXE boot (Legacy PXE or UEFI PXE) depends on the current boot
mode and type of option ROMs in use. The UEFI Network Stack is required in order
to have UEFI PXE functionality fully enabled.
•
Allows you to configure the integrated network controller. The options are:
•
•
•
•
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
•
•
•
Drives Allows you to configure the SATA drives on board. All drives are enabled by default.
The options are:
•
•
•
•
SMART Reporting This field controls whether hard drive errors for integrated drives are reported
during system startup. This technology is part of the SMART (Self Monitoring
Analysis and Reporting Technology) specification. This option is disabled by default.
•
USB Configuration This field configures the integrated USB controller. If Boot Support is enabled, the
system is allowed to boot any type of USB Mass Storage Devices (HDD, memory
key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
•
•
•
Enabled UEFI Network Stack - This option is disabled by default.
Disabled
Enabled
Enabled w/PXE: This option is enabled by default.
Enabled w/Cloud Desktop
NOTE: Depending on the computer and its installed devices, the items listed in
this section may or may not appear.
Disabled
AHCI
RAID On: This option is enabled by default.
SATA-0
SATA-1
SATA-4
M.2 PCIe SSD-0
Enable SMART Reporting
Enable USB Boot Support
Enable Rear USB Ports: Include options for 6 ports
Enable Side USB Ports: Include options for 2 ports
41