Set The Date And Time - Brother MFC-J4410DW Quick Start Manual

9

Set the date and time

a
Press Settings.
b
Press s or t to display Initial Setup.
Press Initial Setup.
c
Press Date & Time.
d
Press Date & Time.
Enter the last two digits of the year on the
Touchscreen, and then press OK.
To move the cursor to the left, press
re-enter the number.
e
Repeat for month/day/time in 24-hour format.
f
Press .
10
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a
Press Settings.
b
Press s or t to display Initial Setup.
Press Initial Setup.
c
Press s or t to display Station ID.
Press Station ID.
d
Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
e
Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
f
Press .
NOTE
If you make a mistake and want to start again,
and go back to a.
press
11
a
Press Settings.
b
Press s or t to display Initial Setup.
Press Initial Setup.
c
Press s or t to display Tone/Pulse.
Press Tone/Pulse.
d
Press Pulse (or Tone).
e
Press
and
12
a
Press Settings.
b
Press s or t to display Initial Setup.
Press Initial Setup.
c
Press s or t to display Phone Line Set.
Press Phone Line Set.
d
Press s or t to display Normal, PBX or ISDN.
Press the desired telephone line type.
NOTE
If you choose PBX the machine will then ask you
to set the Dial Prefix. uuBasic User's Guide:
Setting the Telephone Line Type
e
Press
Set Tone or Pulse dialling
mode
.
Set the telephone line
type
.
7