HIKVISION e series User Manual page 31

User Manual of E Series Network Speed Dome
3. Click to enter the adding interface of preset as shown in Figure 4-7.
4. Configure the preset number, patrol time and patrol speed.
Name
Patrol Time
Patrol Speed
5. Click to save a preset into the patrol.
6. Repeat the steps from 3 to 5 to add more presets.
7. Click to save all the patrol settings.

Calling a Patrol:
In the PTZ control panel, select a defined patrol from
patrol as shown in Figure 4-8.

Buttons on the Patrols interface:
Buttons
© Hikvision
Figure 4-7 Adding Presets
Description
It is the duration staying on one patrol point. The speed dome
moves to another patrol point after the patrol time.
It is the speed of moving from one preset to another.
Figure 4-8 Calling a Preset
Description
Save a patrol
22
and click to call the