Bass Booster - Samsung YP-W3L Service Manual

Setting Sound Effects
EQ
Press and hold the "M" Button. Select [Settings]
[EQ].
Use , to move to the sound mode you want and then press ˆ ˆ
button.
Normal Classic Jazz
EQ
Select User EQ to set the EQ as desired.
- SRS : You will hear 3D surround sound.
- TruBass : This is a bass boost feature that adds fullness to the sound.
- WOW : Consists of SRS and TruBass functions. Provides rich bass and 3D
surround sound at the same time.
SRS
TruBass
WOW
User EQ
Note
- is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc.
- Please adjust the volume to a suitable level, as the volume may increase in the
SRS setting.
- This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.

Bass Booster

Press and hold the "M" Button.
Select [Settings] [Sound Effect]
Booster].
Use , to select Bass Booster On or Off.
Bass Booster function is applied only when you
select Normal,Classic, Jazz or Rock.
On: The bass is boosted.
Off: Music is played back normally.
WOW Level
Press and hold the "M" Button.
Select [Settings] [Sound Effect]
Level].
Use , to select the level you want, and then
press the ˆ ˆ button.
The SRS function is applied only when you select
the SRS, TruBass or WOW in the EQ.
SRS Level: You will hear 3D surround sound.
Use , to adjust SRS level from 0
to 10.
TruBass Level: A bass boost feature that adds
fullness to the sound.
Use , o adjust TruBass level
from 0 to 10.
Samsung Electronics
[Sound Effect]
Rock SRS TruBass WOW
Return
[Bass
Bass Booster
Bass Booster
On
Off
Return
WOW Level WOW Level
[WOW
SRS Level
TruBass L..
Return
User EQ
Press and hold the "M" Button.
Select [Settings]
EQ].
You can adjust the EQ to your preference in the
User EQ Set.
Use the ˇ ˇ , ˆ ˆ button to move to right or
left and use
Press the ˆ ¨ button after completing the setting.
User
Beep
Press and hold the "M" Button.Select [Settings]
[Sound Effect]
Use , to select Beep On or Off.
On : The unit beeps when the buttons are
pressed.
Off : The unit does not beep.
Recording Settings
REC Bit rate
Press and hold the "M" Button.
Select [Settings]
Use , to set the recording bit rate.
You can select a bit rate from 32Kbps, 64Kbps, 96Kbps, 128Kbps,
160Kbps, and 192Kbps.
Selecting a higher bit rate results in better quality sound, but uses
more memory space.
Record
Record
REC Bit rate
Return
Recording Settings
Time Set
Use the Time Set function to set the current time.
1
Press and hold the "M" Button. Select [Settings]
[Time Set].
2
Use ,
to the next stage.
3
After setting the current time, move to CONFIRM and then
press ˆ ˆ .
The current time will be displayed.
Time
Time
Time Set
Clock Typ..
Sleep
Auto Off Ti..
Clock Type Set
Press and hold the "M" Button. Select [Settings]
[Time] [Clock Type Set].
Use , to select Analog type or Digital type
for the clock display .
When turning on the player, only analog clock
type is supported.
[Sound Effect] [User
, to adjust the level.
[Beep].
[Recording] [Rec Bit rate].
Record Record
Return
to set the clock time, and then press ˆ ˆ to move
Time Set
Time Set
User EQ
Beep
Beep
On
Off
Return
[Time]
Clock Type
Clock Type
Analog
Digital
Return
3-5