Table of Contents
Advertisement
Playing Music
Make sure the player is fully charged and the earphones are connected.
Playing Music (Power On)
Press the ˆ ¨ button on the
player. The clock appears on the
screen.
Press the ˆ ¨ button once again
to play a music/voice file.
When turning on the main unit, only
analog clock type is supported.
Pausing Music
Press the ˆ ¨ button to pause playback.
If no buttons are pressed within 5 minutes (or a custom set Auto off
time you selected), the player automatically powers off.
While in Pause mode, press the button again to resume playback.
Power Off
Press and hold the ˆ ¨ button to turn off the power.
Adjusting Volume
Press
,
to adjust the volume form 00 to 40.
Note
- If the file name is not displayed correctly, move to [Settings]
[Language] and then change the language setting.
- The Auto off time can be set in the menu.
HOLD Function
In Hold mode, all buttons are disabled.
This is useful when using the player and walking, jogging etc.
Slide the
switch in the direction of the arrow.
When the button is pressed, the "
the display.
Recording Voice
1
Press and hold the REC button to start voice recording.
2
Press the REC button again to stop the recording and save
the voice file.
Note
- The files are recorded in the order of V001,V002......,and saved as MP3 files in
the VOICE folder after recording.
- If the Memory is full, Voice Recording will be disabled automatically.
3-2
[Environment]
HOLD" message will appear on
Searching for Music/Voice Files
To search for specific parts during play
Press and hold ˇ ˇ , ˆ ˆ during playback to search for a specific
section of the music file you want to listen to.
Release ˇ ˇ , ˆ ˆ to resume play normally.
To change tracks during play
Press ˆ ˆ briefly during playback to play the next track.
Press ˇ ˇ briefly within 5 seconds after playback starts to move to
and play the previous track. Press ˇ ˇ briefly after 5 seconds to play
the current track from the beginning.
To change tracks when stopped/paused
Press ˇ ˇ , ˆ ˆ in stop/pause mode to move to the previous/next
track.
Note
- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate
according to the type of sounds, such as their pitch, in the file.
- When playing a VBR file, you cannot move to and play the previous track even if you
press ˇ ˇ within 5 seconds after playback starts.
- Files that were downloaded in MP2 or MP1 and had their file extension changed to
MP3 may not play.
Loop Repeating
Starting Point
While playing music files, press the
ton briefly at the beginning of the loop you
want to set.
A
appears in the display.
Ending Point
Press the
button briefly again to set the
end of the loop.
A B appears in the display.
The loop is played repeatedly.
Press the
button briefly to cancel the
loop.
Note
- Loop Repeat is automatically released if you Speed Search with ˇ ˇ , ˆ ˆ .
but-
001
NOR
A
B
7.GUMMY-Tor
00 :01:20
MP3
001
NOR
A
B
7.GUMMY-Tor
00 :01:20
MP3
Samsung Electronics
Advertisement
Table of Contents
