Table Of Contents; Contents / Accessories / Cautions; Batteries(R6/Aa) - Kenwood DV-605 Service Manual

DV-605/DVF-R5060-S

CONTENTS / ACCESSORIES / CAUTIONS

Contents
CONTENTS / ACCESSORIES / CAUTIONS............. 2
DISASSEMBLY FOR REPAIR....................................3
BLOCK DIAGRAM ......................................................4
ADJUSTMENT ............................................................4
PC BOARD ................................................................ 5
Accessories
Please confirm that the following accessories are present.
Audio video cord (Red, White, Yellow) ...(1)
(E30-2990-08)
Cautions
Operation to reset
The microprocessor may fall into malfunction (impos-
sibility to operate erroneous display, etc.) when the
power cord is unplugged while power is ON or due to
an external factor. In this case, execute the following
procedure to reset the microprocessor and return it to
normal condition.
÷ Please note that resetting the microprocessor clears the
contents stored in, it returns the microprocessor to the con-
dition when it left the factory.
2
SCHEMATIC DIAGRAM .......................................... 11
EXPLODED VIEW ....................................................17
PARTS LIST..............................................................19
SPECIFICATIONS ......................................Back cover
Remote control unit ...(1)
(A70-1570-08)
1
In Power ON condition, keep the DISC 3 key and the 4
(Skip) key pressed at the same time.
2
When both keys are pressed, the region code of the unit,
the software version, etc. will be displayed on the dis-
play. (When nothing is done, the display of this informa-
tion continues.) Example: 72. 14.02:05
3
Press the DISC 4 key and the 4
"BYE" will be shown on the display.
4
Press the POWER ON/OFF switch to go to Power OFF.
5
When Power ON is performed with the POWER ON/OFF
switch, the settings become the default factory settings.
The marking of products using lasers
(For countries other than U.S.A., U.S.-Military and Canada)
The marking this product has been classified as Class 1. It
means that there is no danger of hazardous radiation outside
the product.
Location: Back panel
Coaxial cable ...(1)
Batteries(R6/AA) ...(2)
(E30-7235-08)
4 key at the same time. 4 4 4
CLASS 1
LASER PRODUCT