Authentication Type - Aztech WL562 User Manual

Wireless n usb adapter
Table of Contents

Advertisement

Authentication type:

1. PEAP: Protect Extensible Authentication Protocol. PEAP transport securely
authenticates data by using tunneling between PEAP clients and an authentication
server. PEAP can authenticate wireless LAN clients using only server-side
certificates, thus simplifying the implementation and administration of a secure
wireless LAN.
2. TLS/Smart Card: Transport Layer Security. Provides for certificate-based and
mutual authentication of the client and the network. It relies on client-side and
server-side certificates to perform authentication and can be used to dynamically
generate user-based and session-based WEP keys to secure subsequent
communications between the WLAN client and the access point.
3. TTLS: Tunneled Transport Layer Security. This security method provides for
certificate-based, mutual authentication of the client and network through an
encrypted channel. Unlike EAP-TLS, EAP-TTLS requires only server-side certificates.
4. EAP-FAST: Flexible Authentication via Secure Tunneling. It was developed by Cisco.
Instead of using a certificate, mutual authentication is achieved by means of a
PAC (Protected Access Credential) which can be managed dynamically by the
authentication server. The PAC can be supplied (distributed one time) to the client
either manually or automatically. Manually, it is delivered to the client via disk or
a secured network distribution method. Automatically, it is supplied as an in-band,
over the air, distribution. For tunnel authentication, only support "Generic Token
Card" authentication.
5. LEAP: Light Extensible Authentication Protocol is an EAP authentication type used
primarily by Cisco Aironet WLANs. It encrypts data transmissions using dynamically
generated WEP keys, and supports mutual authentication.
6. MD5-Challenge: Message Digest Challenge. Challenge is an EAP authentication
type that provides base-level EAP support. It provides for only one-way
authentication - there is no mutual authentication of wireless client and the
network.
User Manual
Page 39 of 43

Advertisement

Table of Contents
loading

Table of Contents