802.1X Setting - Aztech WL562 User Manual

User Manual
Definition of each field
1. Authentication Type: There are 7 authentication modes supported by the utility.
They are open, Shared, LEAP, WPA and WPA-PSK, WPA2 and WPA2-PSK.
2. Encryption Type: For open and shared authentication mode, the available
encryption types are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK
authentication mode, the encryption type supports both TKIP and AES.
3. 8021X
4. Pre-shared Key: This is the shared key between the AP and STA. If operating in
WPA-PSK and WPA2-PSK authentication mode, this field must be filled with a key
between 8 and 32 characters in length.
5. WEP Key: Only valid when using WEP encryption algorithm. The key must match
the AP's key. There are several formats to enter the keys.
6. Hexadecimal - 40bits: 10 Hex characters.
7. Hexadecimal - 128bits: 32Hex characters.
8. ASCII - 40bits: 5 ASCII characters.
9. ASCII - 128bits: 13 ASCII characters.

802.1x Setting

802.1x is used for authentication of the "WPA" and "WPA2" certificate by the server.
Page 38 of 43