Table of Contents
Advertisement
Chapter 5 FNS-7000A-Maintenance
FNS-7000A is specially designed to run 24 x 7 and be ready at all times against
system crash caused by power outage. This section provides a general overview
on system maintenance.
5.1
Restart/ Shut down Server
Follow the steps below to restart or shut down FNS-7000A.
1. Ask all active users of NAS to save their files and disconnect from the server.
2. Enter the administration page and select Restart/ Shutdown in System Tools.
3. Click Restart to reboot the server or Shut Down to turn off the server. You
can perform these actions by the LCD panel.
5.2
Reset Administrator Password and Network Settings
To reset the administrator password and network settings of FNS-7000A,
1. Press the reset button of FNS-7000A for a few seconds. A beep sound will be
heard.
2. Login FNS-7000A with the default user name and password:
User name: administrator
Password: admin
Note: To reset the system by the reset button, the option "Enable configuration
reset switch" in Hardware Settings must be activated.
78
Advertisement
Table of Contents
