Asus MG248 series User Manual page 21

®
• NVIDIA LightBoost
conventional 3D technology in 3D mode with zero increase in total energy
consumption*
*Compatible with the NVIDIA 3D Vision
function, turn off Adaptive-Sync first and make sure that the input source is
DipslayPort or DVI.
4. Image
Set the image related setting from this menu.
• Sharpness: The adjusting range is from 0 to 100.
• Trace Free: Adjusts the response time of the monitor.
• Aspect Control: Adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
• ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
• Adaptive-Sync (DisplayPort only)
graphics source to dynamically adjust display refresh rate based on
typical content frame rates for power efficient, virtually stutter free and
low-latency display update.
To activate Adaptive-Sync, turn off NVIDIA 3D function first.
* Adaptive-Sync can only be activated within 40Hz ~ 144Hz.
* For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
ASUS MG248 Series LCD Monitor
™
: User can enjoy twice the brightness of
Image
S h arp nes s
T r ac e F ree
A s p ect C ont rol
A S C R
A d ap t i ve- S yn c
®
2 kit. To activate NVIDIA 3D
ASUS MG248
RacingMode HDMI 1080p 60Hz
Allows an Adaptive-Sync supported*
:
3-3