Connecting.the.cables; Turning.on.the.monitor - Asus MG248 series User Manual

2.4 Connecting the cables
Connect the cables as the following instructions:
•. To.connect.the.power.cord:
a. Connect the power adapter securely to the monitor's DC input.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
•. To.connect.the.DisplayPort/DVI/HDMI.cable:
a. Plug one end of the DisplayPort/DVI/HDMI cable to the monitor's
DisplayPort/DVI/HDMI port.
b. Connect the other end of the DisplayPort/DVI/HDMI cable to your
computer's DisplayPort/DVI/HDMI port.
c. Tighten the two screws to secure the DVI connector.
•. To.connect.the.audio.cable:.connect one end of the audio cable to the
monitor's Audio-in port, the other end to the computer's audio-out port.
•. To.use.the.earphone: connect the end with plug type to the monitor's
earphone jack when an HDMI or DisplayPort signal is fed.
2.5 Turning on the monitor
Press the power button
power indicator
2-4
. See page 1-2 for the location of the power button. The
lights up in white to show that the monitor is ON.
Chapter 2: Setup