Table of Contents
Advertisement
Warning
Flashes once in green and red:
Status
1. Standby
2. Lamp is approaching the Replacment Life Cycle
3. Cooling / Warm up
4. Power on / Normal
5. Lamp fail
6. Lamp door open
7. Fan fail
8. Over Temperature
9. System Error
Remark:
The time period of each step in the above LED blinking pattern is 500 milliseconds, e.g., for "Cooling / Warm up" state, the
green LED will ON for 500 milliseconds, and then OFF 500 milliseconds, and then repeat the above LED pattern.
Simple troubleshooting and definition of
The lamp is approaching the Replacement Life Cycle. It should
be replaced with a new lamp.
Note; Replacement Life Cycle varies depending upon selected operation
mode, environmental conditions and usage.
Blue
Green
(Standby)
(Power)
the LED indicators
( Issue )
repeat
repeat
repeat
Red
repeat
repeat
repeat
repeat
59
Advertisement
Table of Contents
