Table of Contents
Advertisement
SERVICE
Service
The functions covered in this unit relate to the display of some basic information about the projector.
*Memory of the custom timing files will be erased in the Factory Reset operation.*
• Model: the designated model number of the projector.
• Serial Number: the designated serial number of the projector.
• Software Version: the version of software installed on the projector.
• Active/PIP Source: displays the current PIP sources.
• Pixel Clock: displays the pixel clock of the current input signal.
• Signal Format: displays the format of the current input signal.
• H/V Refresh Rate: displays the horizontal and vertical refresh rates for the current image.
• Lamp1 Run Time: displays Lamp1's current run time.
• Lamp2 Run Time: displays Lamp2's current run time.
*Notice! When a lamp's run time has reached 1200 hours or when you notice the projected image to be noticeably dimmer,
please replace the lamp.*
• Projector Run Time: displays the projector's total operating hours.
Lamp Hour Reset
Use this function to reset the hours for lamp1 and lamp2 to zero.
* After replacing the lamp, remember to reset the lamp hours to ensure the accuracy of lamp hours displayed in the OSD
Menu.*
Blue Only
Enabling this option will make the projector display only blue color to facilitate the process of image
inspection for the service personnel. For detailed instructions on how to use this function, consult a
qualified service personnel.
Factory Reset
Use this function to restore the configurations in the OSD Menu back to factory default. Note that
this function will not apply to items including no signal, network, Projector control, startup Logo,
language, High Altitude mode and lamp hours.
*When Factory Reset is executed, all source memories created by the projector (i.e. timings files) will be erased.*
OSD Menu description
XXXXXXX
53
Advertisement
Table of Contents
