Page 1
Projector CP-WU8451/CP-WU8461 User's Manual (detailed) Operating Guide – Technical Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9...
Page 2
Example of computer signal NOTE panel are identical. composite sync or a sync on G.
Page 3
Initial set signals Initial set signals Back porch (B) Front porch (D) Back porch (b) Front porch (d) Active video (C) Active video (c) Data Data H. Sync. V. Sync. Sync (A) Sync (a) Vertical signal timing (lines) Resolution Signal mode (H x V) 20.3 TEXT...
Connection to the ports NOTICE COMPUTER IN MONITOR OUT port. COMPUTER IN, MONITOR OUT ⑪ ⑫ ⑬ ⑭ ⑮ ⑥ ⑦ ⑧ ⑨ ⑩ ① ② ③ ④ ⑤ <Computer signal> Signal Signal 10 Ground Ground 14 V. sync.
Page 5
Connection to the ports (continued) HDBaseT ② ④ ⑥ ⑧ ① ③ ⑤ ⑦ Signal Signal Signal HDBaseT0+ HDBaseT2+ HDBaseT3+ HDBaseT0- HDBaseT2- HDBaseT3- HDBaseT1+ HDBaseT1- HDMI 1, HDMI 2 ② ④ ⑥ ⑧ ⑩ ⑫ ⑭ ⑯ ⑱ HDMI connector ①...
Page 6
Connection to the ports (continued) COMPONENT Cb/Pb, Cr/Pr S-VIDEO Signal C (color signal) Ground Ground VIDEO...
Page 7
Connection to the ports (continued) AUDIO IN1, AUDIO IN2 AUDIO IN3 AUDIO OUT CONTROL ⑨ ⑧ ⑦ ⑥ ⑤ ④ ③ ② ① Signal Signal Signal Ground...
Connection to the ports (continued) ② ④ ⑥ ⑧ ① ③ ⑤ ⑦ Network Guide. Signal Signal Signal USB TYPE A USB TYPE B ④ ③ ④ ③ ② ① ① ② ④ ③ ② ① Signal Signal - Data - Data + Data + Data...
Page 9
Connection to the ports (continued) To input SCART RGB signal; RCA plugs Audio R (plug) Audio L Video SCART connector dealer.
Page 10
RS-232C Communication RS-232C Communication 19). Connection CONTROL RS-232C CONTROL RS-232C cable (cross) RS-232C port CONTROL port ⑨ ⑧ ⑦ ⑥ ⑤ ④ ③ ② ① CD (1) (1) − RD(2) (2) RD TD (3) (3) TD (4) − DTR (4) DSR (6) (6) −...
RS-232C Communication (continued) Communication settings 1. Protocol 2. Command format Command Header Data Header Data Setting Action Type code size code Action <SET> (aH) (cH) <GET> (aH) (aH) (aH) <EXECUTE> Run a (aH) [Header code] [Packet] [Data size] refer to (19).
Page 13
Command Control via the Network (19). NOTE Connection LAN or HDBaseT port to HDBaseT USB TYPE A USB wireless adapter LAN or HDBaseT port LAN or HDBaseT port ・LAN cable (CAT-5e or greater) ・For HDBaseT connection - CAT-5e or greater - shielded type (connectors included) - straight cable - single cable...
Command Control via the Network Communication Port Port Settings [Enable] [Network Control Port1 (Port: 23)] Network Control [Enable] Port1 (Port: 23) [Authentication] is required. [Enable] [Network Control Port2 (Port: 9715)] Network Control Port2 (Port: 9715) [Enable] [Authentication] is required. Security Settings Network Control [Network Control Port1 (Port: 23)] and Re-enter...
Command Control via the Network (continued) Command control settings [TCP #23] 1. Command format 2. Response code / Error code (1) ACK reply : 06h Refer to RS-232C communication (12). (2) NAK reply : 15h Refer to RS-232C communication (12). (3) Error reply : 1Ch + 0000h Refer to RS-232C communication (12).
Page 17
Network Bridge Communication 6. Network Bridge Network Guide. NOTE Connection LAN port. CONTROL USB wireless adapter LAN cable (CAT-5 or greater) RS-232C cable (cross) RS-232C...
Page 18
Network Bridge Communication Communication settings SERVICE menu Item Condition BAUD RATE NOTE 6.4 Transmission method Network Guide.
Page 19
RS-232C Communication / Network command table Command Data Header Action Type Setting code Turn off 06 00 2A D3 01 00 00 60 00 00 Turn on 06 00 BA D2 01 00 00 60 01 00 06 00 19 D3 02 00 00 60 00 00...