Front Panel Control - Optiquest VS12118 User Manual

FRONT PANEL CONTROL

Power Button:
•
Press this button to switch ON/OFF of monitor's power.
Power Indicator:
•
Green — Power On mode.
Orange — Power Saving mode.
MENU / ENTER:
•
1. Activates the OSD menu or confirms adjustments to settings.
2. Exit OSD volume display when in volume OSD status.
Volume < >:
•
1. Activates the volume control when the OSD is OFF.
2. Navigate through adjustment icons when OSD is ON or adjust a function when
function is activated.
Auto Adjust button: (for D-sub only)
•
When OSD menu is in off status, press and hold this button to activate the Auto
Adjustment function.
(The Auto Adjustment function is used to optimized the H-Position, V-Position,
Clock and Phase.)
NOTES:
Do not install the monitor in a location near heat sources such as radiators or air
•
dusts, or in a place subject to direct sunlight, or excessive dust or mechanical
vibration or shock.
Save the original shipping box and packing materials, as they will come in handy if
•
you ever have to ship your monitor.
For maximum protection, repackage your monitor as it was originally packed at the
•
factory.
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn
•
stains may be removed with a cloth lightly dampened with a mild detergent solution.
Never use strong solvents such as thinner, benzene, or abrasive cleaners, since
these will damage the cabinet. As a safety precaution, always unplug the monitor
before cleaning it.
Function Key Lock:
•
Press the <「Volume -」, >「Volume +」 and the 「Menu」 buttons simultaneously
to enable the Function Key Lock. When the Function Key Lock is enabled, only the
Power button is active. Press the <「Volume -」, >「Volume +」 and the 「Menu」
buttons simultaneously again to unlock the function keys.
Optiquest Q91b 10