Table of Contents
Advertisement
Temperature control knob
The temperature control knob is used to select the temperature
and the grill power or cleaning level.
Setting
Zero setting
Ú
50-270 Temperature
range
I, II and
Grill power
III
Cleaning levels
Heating symbol
While the oven is heating up, the
display panel. When the oven is ready for your dish and
maintains its temperature the
The
s
symbol never lights up for grill power and cleaning levels.
Your accessories
The accessories supplied with your appliance are suitable for
making many meals. Ensure that you always insert the
accessories into the cooking compartment the right way round.
There is also a selection of optional accessories, with which
you can improve on some of your favourite dishes, or simply to
make working with your oven more convenient.
inserting the accessories
The accessories can be placed inside the oven on 5 different
levels. Always insert them as far as possible so that the
accessories do not touch the door glass.
The accessories can be removed halfway until they are
secured. This makes it easy to remove food.
6
Meaning
The oven fails to heat up.
The oven temperature in ºC.
The different levels for the large
surface grill
.
(
I = level 1, low
II = level 2, medium
III = level 3, high
Self-cleaning levels
.
q
I = level 1, low
II = level 2, medium
III = level 3, high
symbol will be lit up on the
s
s
symbol will switch off.
Inside the oven
There is a light inside the oven. A fan prevents the oven from
overheating.
Light
The oven light remains on while the oven is working. The light
switches off at set temperatures of less than 60ºC and during
the clean function. This ensures optimum precision control.
However, the light can be turned on without the oven being on
by setting the function control knob to
Fan
The fan can be turned on and off as necessary. The hot air
escapes through the top of the door. Warning! Do not cover the
vent. The oven could overheat.
The fan remains on for a certain length of time after the oven
has been switched off so that it can cool down more quickly.
When inserting an accessory in the oven, make sure the
curvature is at the rear. This is the only way to ensure it fits
perfectly.
Depending on the equipment, if the appliance has guide rails,
these will interlock slightly when fully removed. This means the
accessory can be easily inserted. To unlock, reinsert the guide
rails in the oven exerting slight pressure.
Note: Accessories may deform as they heat up. This
deformation will disappear when they cool. This does not affect
the normal operation.
.
^
Advertisement
Table of Contents
